![]()
The tools of HW
Swarm, called “swarm” no doubt for the likeness to bumblebees hovering around they’re nest, but then this is an attack tool, so I dont know what natural animal acts like these fighters do. The word swarm is being used very lightly around Homeworld, confusing newer players. The swarm is only 1 thing. It is the USE of fighters in “many” small groups but grouped together as 1 big group, using one or different of the formations. (ex. 4’s of claw, 3’s of delta, 4/wall.) These small groups attack on separate runs (paths), so it creates the “swarm” look to the fighter attack. Not all uses of fighters classify as “swarming”.
To do, take 2-6 of any kind of fighters, (make each small group all 1 kind of fighter [they have different speeds] and work best with same speed ships.) So for the most basic swarm you have only scouts, take between 2-6 and make a small claw/wall/delta or whatever you want. Move it to an area. Then just go do the same thing to the rest of your scouts. So if you have 30 scouts, and your making small groups of 3 in delta, you would have 10 small groups in an area. What I do is make my group # when I have like 3 of the small group formations made, then after that point when I make another small group I just press shift when highlighted and 1 (brings up the other, then Ctrl and 1 to make the new group part of the big group.) This is your swarm. If you use it with just different tactics it will continue to be swarm, if you change formations during battle you can lose your swarm, although some of the better players have been doing just this ( I do it by using the custom button, but custom is no longer a normal swarm when you do it.) For those that use custom you are “custom swarming” because it is a noticeably different way for fighters to attack then being in several small groups.
To Use, this will be somewhat controversial as many ppl do many different things with swarms in HW, I will however lay a framework for practicing with swarms. I use a new swarm which can be used in 2 different ways. I use a 4/wall swarm, the shape of walls all clumped together I find has the best hit value, its runs are more slower overall than 3’s of delta because there is the xtra scout in each group, so less groups. This is my basic swarm which I attack on f4 with, often moving from f2 to f4 when applicable. Sometimes I change my normal swarm into separate swarms where one is on evasive and the other aggressive. You need to give them separate group #?s too though, because you often need to change the tactics between them and need to call them up quickly with the double click of the group #. However the 4/wall is also the same way I build my custom swarm, the only difference is that I press f11 for custom when the normal swarm is made and they are moved to be in tightest clump. If I’m going to use this I try to get interceptors early. Interceptors make the custom work, without them I’d rather trust my retargeting with normal swarm ( the one with runs, diff paths) then to have 1 clump of just scouts moving around.
continued…
A major problem people have in homeworld is that they think too lateral, the game is quite 3d, you need to think outside the lines. Your quickest bet for killing the enemies swarm is to have the cover of your corvettes, so I use my scouts on f2 to attack something early I dont even intend on killing. Once the enemy is chasing me I drag my scouts with M=move button right past my corvs. This doesn’t always work as the enemy is not always this new, however I dont change my use of fighters. I never send them in first, it is foolish to attack fighters with fighters while they are around the enemies corvs. So if I cant drag out they’re swarm to my corvs then I initiate battle with my corvs until they feel they are helped by hitting with they’re fighters. Then I target all of they’re fighters with corvs. When they’re swarm makes the first run past my corvs on attack I target them with my fighters. But again I dont intend on actually hitting them with the fighters, so I do f2 and move them towards my mothership again. As soon as I do this the enemy normally starts hitting my fighters with his. But I have dragged his fighters beyond my corvs (so they are nearer to my mothership.) This is where I want to attack them full force, if my corvs are out of reach I will work on the enemies wall with mine. Because I am closer to my mothership for the battle I can reinforce quicker. Many people wait until they have enough fighters to make small groups again before adding the ships. I always have a constant flow of ships being moved from mothership to battle. For fighters I simply add them press f2 or f4 whatever is applicable and zz a few times. They are a swarm which means many diff attack runs. Once the battle is headlong you are more benefitted by ships added sooner, rather than by the ships being in formations when they are added. They will still shoot even if every ship flies around individually.
The Wall, there are other ways to use attacking corvettes than in a wall, but Wall IS the most efficient use of the attacking corvettes. The wall formation allows support frigates to quickly heal each corvette that gets shot at by the enemy. The wall is the best protection against fighters as it can be supported while being hit VRY hard and you can limit your losses by the number of supports you have. Multi-gun vettes really are the most deadly against fighters because they have “multi guns” hehe, that hit more than one fighter at a time. With more multis in your wall the more hits all the fighters take, the quicker they die as a group compared to quickly one by one. The Heavy corvette has the deadly burst attack which is vry useful for disrupting globs of fighters (custom, bballs.) The light vettes are cheap and are about equal with interceptors for firepower, but can be supported. When a person says “Wall” they mean corvettes in f9(wall formation) supported by at least 1 support frigate, or a number of repair corvettes. If there is no healing factor to your wall then it is not a wall, but simply corvs in wall formation. This should be a help for newer players. BUILD corvs, but DONT build corvs if your not going to build support frigates/repair corvettes.
To Do, its pretty simple to make. If you wait til you have say 8 corvettes on Subjugate1 (I say Sub1 so ppl know that its a good place to practice this) then all you have to do is click on 1 corvette in military parade formation and all of them will be highlighted. Then just press Ctrl 2 (I use #2 for my wall, always have.) Then press F9, and move it out past your fighters. Then click on 1 support, if you have more than one they all become highlighted ( i say this because it saves time from pulling boxes over your ships in military parade) press f2 for evasive, then press z and pull the box around your corvettes. Although the support frigate on f2 moves the fastest it might still be too slow to keep up with corvettes moved a long distance, so always watch you wall. If your corvettes get to battle before your support frigates they become easy baby food for the enemy who has supports within supporting range. Just be careful.
To Use, it is pretty basic to use, however the quicker and smarter you become the better your wall can be. I say “smarter” because each player needs to learn when to shoot what in battle, and with what. I find the wall is the gentlemens tool. Like a politician, he has support for his attack, but if he doesn’t he falls flat. The corvettes are much slower than fighters so you need to be careful what they attack. You want to initiate battle by hitting something of the enemies, but you dont want your corvettes moving to the enemies side. The least that you want is for the corv battle to be at the halfway of a small map, if not halfway then closer to YOUR mothership, not the enemies, so think about this in battle. I always shoot fighters that are on my side of the map as it guarnatees my corvettes dont chase to the enemies side. However sometimes there are no fighters/corvs on my side, and the battle must happen. Again think of the swarm, you want to hit the enemies with your wall, and you dont want yours hit by his. I try to never give the enemy a shot at my swarm until his is gone. A good trick for walling is to hit a collector or support frigate with your corvs. If the enemy doesn’t support it then just keep hitting it until it dies, if the enemy starts supporting it then hit his corvettes because they’re unsupported. If you can tell the supports are coming back to support his wall go back to hitting a collector/support frigate. Do this until you have him beat down.
BattleBall, or as I’ve heard it called recently “newb killer” or “ruiner of HW”. I dont know where the smurf “Teh Owner” got the idea that a smart tactic is a cheap tactic, I dont think he wants to do homework for his play here. I can only be “somewhat” cocky about battleball because I am just now starting to use it in a deadly fashion, for a long time I was ALWAYS on the losing end of it and never gave up, or whined that it was cheap. The battleball is one group of fighters in sphere formation guarding a central ship, and on f4. They have constant fire, because the central ship is using them as a guard, they move based on the command of the central ship, so the engines are at a minimum, and the firepower at a maximum. It works greatly because the fighters aquire targets based on nearness, so you can sit in place and move on to other things. It is not a cheat in the least, it is an end of battle tool. You can only use it in specific circumstances so to counter it you just need never allow those circumstances to show. (the circumstances I’ll explain below.)
To Do, the battle ball is actually a relatively easy thing to create, however the use of it is not so easy. All you do is as I said earlier, have 1 group of fighters on f10(sphere) guard a central ship on f4. Many ppl use this as the mothership killer on small maps like radial, talas, subjugate1, however this is not its best use. I play like project now to a degree, only he does the fleet swarm (includes corvs in 3’s of delta, they dont swarm because they dont do runs, but it isn’t a wall either.) I wall and I find that makes my strategy better than his simply because it gives me a controller, and the option for changeup based on the enemies strat, he did teach me one thing w/o meaning to however. If you can take care of the enemies swarm quickly, you can bball his collectors/controllers, or even the enemies corvettes. My strategy is different as I said. I try to isolate the enemies swarm in front of my mothersip. If I cant it takes my wall being killed to bring out my fighters, I will simply add to it each corvette that comes out of the mothership, and will keep shooting the enemies fighters to create a bball circumstance as quick as possible. I dont guard my wall with bball unless the enemy has only caps left. The bball guarding the wall is open fire for the enemies corvs, they will open up into big sphere and be ineffective. *ask me about the enemy using bball on his wall when you have no fighters left, i have a trick to kill it that the enemy normally doesn’t see coming.
To Use, it seems pretty simple but I have created a system that works for me. When I am shooting collectors or caps I like to distribute 1-3 scouts in different areas around the enemies fleet with a diff group number to each scout. My big fighter sphere is always #1. I guard one of the scouts (#3 is the first normally for me) and I move it to where I want it. Then as the enemy tries to attack my bball with caps I guard one of the other scouts. Scouts as the central ship to a bball is best because you can press f2 and zzz and move the ball quickest (away from scuttles.) I have a mothership kill that uses this (3 diff scouts as central ship tool) what I do is continue to add the fighters that come out of my mothership, to do it as quick as possible you NEED at least 2 scouts with diff group numbers. I add the new ships and guard #3 scout, then as more ships come out I add them and guard #4, then I’m always gettn the most firepower I can without having to zoom in and reguard the central ship (makes things less confusing and more efficient). When your guarding one of the scouts you simply move the other to the best place for attack. If the enemy has caps/collectors or corvettes by his MS you can attack them with this fast moving bball by getting the central scout far enough away from the enemies mothership that the bball cant hit it. Then the bball will hit the next closest ship. If your bball is not firing and its deffinately close enough to, then just attack something on sphere formation with your group, when they start shooting just re-guard the central ship, they will start up again. Also if you see a pop in the bball (lost a ship) and it stops working, then guard something else quickly because you’ve lost the central ship and the bball wont do a thing for you. Also in that circumstance you might want to press f2 with your fighters on f10(sphere) and attack something and press zzzz, that way if the enemy was going to scuttle after he got your central corv you can avoid it as quick as possible.
Capital Ships/Supporting, known as “caps” or “capping” is the use of the Capital class ships up to the highest level. Although HC is a rare thing in normal games, indeed in smaller games even destroyers are. You cannot use Caps against a good player without having support frigates, and you cant beat a good player with caps unless you are GOOD at supporting. The capital ship fleets offer a lot better firepower to armour ratio, yet they are still very vulnerable to corvette walls and fighter formations. The newest tool in HW is the cap scuttle. Scuttling a support frigate into a swarm to destroy it, there is a reason for this, fighters used correctly on a small map SHOULD be able to win b4 the person with Caps has enough. So to disable the person who swarms better you use 1 ship worth about 600rus (collectors are better scuttlers, but more costly to lose) and you take out say 30 ships from the enemy who probably never went caps. It basically disables the swarmer, but you need to be good at it. Capping on small maps is best done with a gravity generator. On Subjugate 1 I have a strat where I go caps for controller/support frigates, then straight to grav. I build my swarm (use it wisely) then grav b4 the enemy thinks its possible and shoot the enemies fighters with my supports. And bball with my own. *I?m just trying to paint an understanding of Caps. They are not agile, they are not quick, but they can be mean if used right. For the newer players playing Subjugate1 I would give the advice I got way back, don?t bother Capping unless you are getting grav. And on talas or radial don?t bother unless you got interceptors in your swarm, or you have a light wall to changeup to caps later, the good players with small ships are just too good to face with just caps.
To Do, there are different ways to create Capital ship fleets, you can use formations for some and leave others as stragglers, (ie 4 ions in wall w supports behind it, then 2 destroyers simply grouped with the ions, but not in formation with them.) That is not the only way, some ppl do big formations, more people do the ?Cap swarm? as I call it, however it is not a swarm at all (no runs) but it does resemble a swarm. The Capital ships are not aligned with anything, but simply clump together and make the firepower more dense. They are somewhat easier to support this way, however there are easy ways to kill ships when the enemy does this too. Simply hit a Cap at the back of the group and the supports move from behind the whole group, then maybe hit a support, this will make they?re supports fall even farther behind they?re lead Caps. If you cant get the support frigate then put all firepower on one of the front Caps. Just be creative when you hit the enemy, don?t hit one ship and go somewhere else for 2 mins, often times the enemies supports are enough to keep the ship your hitting alive, you need to be smart using a Cap fleet. When I use a defense field frigate I tell it to attack on f2 the enemies assaults or wall. However when your using it on a wall you have to notice when the enemy moves his wall and make sure your dff is in the right spot, but if the enemy doesn?t know how to outrun the dff range then it works very good just on attack rather then moved to a spot.
To Use, I always attack 1 ship at a time unless it is simply the final picking apart of the enemies Cap fleet. If it?s the end and my numbers are far greater I might spread my cap fire to different ships and have my smaller ships concentrate on one at a time. This disables supporting but allows the enemy attack ships to live as a group about 5-10 seconds longer, but I kill them ALL quicker than I would if I hit one at a time. I use taidan so I have never had the benefit of self heal supports, but if you are kushan all you do is highlight the support that is being hit and on f2 or f3 press Z and click on it. Of course you still need the support from your other supports on the one being hit. In reality it?s a command that doesn?t even make sense to a taidan user, we are used to our ships only bein able to do things to other ships not to themselves, its about the only advantage at all really that kushan has, besides double mines I guess. For taidan If I don?t have many support frigates I don?t even give them a number, its easy enough to notice the light blue of a tai support, to click on it and bring up all the supports that were moved together(much like military parade, once the supports are used together you can bring up the whole group by clicking on one once) however if I have more than say 5 I group them #9. Always have that ready before battle because the grouping of tai supports is what allows them to be just as strong as Kushan supports. When a support in group 9 gets shot at, all I do is double click 9 quickly, then press shift and click the one that is bein shot, then press Z and click the one that?s being shot again. I always make the support thats being shot continue supporting what it was. That way the supports helping it will follow closely the battle, instead of being left in an area and my wall or caps get picked apart w/o supports nearby, which happens A LOT, and is a big area for homework for any Capper of any kind. As I said earlier I use ?Cap swarm?, which is simply all attacking Caps in 1 group moved to an area but not given a formation, they clump together and have denser firepower. For hitting a mothership I do so on wall or sphere, also beware of enemies mothership ramming your capital ships, especially Kushan motherships. Using the Cap swarm is good for battle, but not for hitting the mothership. Often the enemy can break your back if you allow your ?Cap Swarm? to shoot the mothership, the Caps wont act evasively at all, and often move right into the oncoming ms. Avoid this by giving F10 command, or by pressing attack with your Cap swarm and then moving the Caps to either side of the oncoming MS, they will continue to fire as you move them. This is also a good tactic for battle where you split your Cap swarm to 2 sides, have each side hitting a different ship to confuse the enemy, but be ready to split up your supports too.
Collectors/Controllers, often underrated by newer players and becomes the folly to so many games approached with true earnest for learning. That?s why I tell a newer player to pay attention to collectors, to work with evasive around your mothership, and have collectors on f4 while near enemies to avoid docking without being full. Building collectors is one of the most important parts of strategy for this game. When you decide on a collector and controller ratio for the game you have to also be thinking about what you intend on researching and how many research ships your going to build to attain those technologies. The losses in many games are simply bad equations at the start for what you are doing. Often times the newer player has 6 collectors and 2 controllers aiming for destroyers and the enemy has 3 collectors and destroys him because he went EARLY swarm. The equation you write is not what you think is powerful, but what you think can beat your enemy. If you are unaware of the enemies fleet you cannot decide the right times to attack (deciding your fleet firepower favors you with the positioning of the enemies) you cannot play blind. Once your equation is written your collectors are added as the finishing touch as you apply the number of collectors and controllers needed with the resources deployed as they are on the map to build the fleet you know u need to win. This is an ongoing process as you can attain better fleets then the enemies by manually docking during the game to be at highest efficiency (saving collectors from straying far for 40 rus, just dock it now on evasive.) Often the game will be sliding in the enemies favor but you can gain it back by a few quick docks of ? full collectors.
To Do, at the start of the game I press EH every time because it?s the quickest way to get the collectors moving while also following up with other tasks (Rresearch, Bbuild.) Once those two early tasks are done I move my mothership towards enemies (aka ?middle?) because the closer your mothership is to the enemy then the quicker you can reinforce yourself, and normally moving to the middle is rewarded with ownership of valuable resources. Then I go back to my collector, I was able to do the other 3 things relatively quick, so the collector has only just begun to move, I put it on f2 and move it parallel with the edges on any side that I have it move by. I use M to move it especially at corners because it turns quicker when you know what paths are smoothest and use them.
To Use, I manually dock on any map that has big asteroids and small ones. Subjugate1 for example has vry small rubble in front offering only small ru per piece, I just have on f2 and let them collect. In the middle however the asteroids are big and small, there I will manually dock. I sometimes choose to dock a collector that is ? full instead of stray far for the last little bit. Also getting the loads earlier is often better on small maps, and for example on talas the more thorough your collecting the more regenerate rocks appear, so going 5 collectors and doing 1 big rock/1small rock loads = ? full you get no build pause, and you get more overall. When I manually dock a collector I highlight it and have it on f2, I normally move it with M towards the controller, or if it?s just my mothership I press f2 and D for dock. When I have a controller though I need to do 2 parts for highest efficiency. I need to move the collector fastest so on f2 and move so as to size up paths for the controller, then move the controller halfway between the collector and itself. Once the collector is mostly to the controller press D for dock. Move the controller just the tiniest bit into the collectors path and at the last second press ctrl and alt on the collector. It doesn?t need to be that precise order either, you can improvise, but I have found that method vry efficient as the collector turns as tight to the controller as possible, often the collector even passes through the controller as it docks.
Continued (collectors)??
The newest craze is killing swarmers. People proud of collectors with high firepower, and probes likewise. I actually am fond of these people now, not probe bombers in general because I know a lot of them are fools, but using probes and collectors as bombs I agree with. To me taidan is almost cheating in how it collects faster so I don?t mind kushan probes having higher firepower, and people using it. To me the game is fair, I can dodge a probe, and if someone can aim and hit with a probe I?d say they?ve earned the good move. So is with the collector that is very costly if wasted, but can turn the tide if and when it kills a swarm. Often people are unaware that the swarm they are not using is in danger. What I do is either the unexpected one, where they move the swarm into my support or collector and I scuttle it quickly, or they are unaware and I move coll into a swarm or bball by press f4 and attack and kami. Then zzz, even if it doesn?t help, it feels good because your coll is kind of flying when it passes the swarm, and if u time it even half bad then it?s a crazy scuttle blast. Also as a last resort to say some hvy corvs in a wall against your fighters or some miners you can attack corvs with collectors and press k for kami, only do this if it helps. More applicable I would think though is the help a collector can be when an enemy brings out a grav well and your collector on f4 and attack kamikazis right into it, killing it. If un-supported it goes one for one, even if supported the grav is toast normally if your collector hits it at all. Sometimes you don?t lose your collector (and can attain this better with supports.) Even if you will get it you have to weigh it up, do you have any Caps to think of so as to save your collector?
Written by LightsEDA